The F-30 Ogee Diamond Router Bit – Position 1 is a sintered metal-bond, continuous rim diamond router bit built for heavy shaping of large ogee profiles on quartz, granite, and quartzite.
What “F-30” Means
• F = Ogee profile
• 30 = 30 mm profile height
• 30 mm equals 1.25 inches
The 30 mm ogee is a deep, premium decorative profile, offering a larger upper curve and a more dramatic lower drop — ideal for high-end residential and commercial stonework.
What “Position 1” Means
Position 1 is the coarse shaping stage, using approximately 30/40 grit diamonds.
This stage:
• Removes heavy stock quickly
• Cuts the full depth of the 30 mm ogee shape
• Prepares the edge for Position 2 and final finishing
The sintered metal bond contains high diamond concentration, exposing new diamonds through the life of the tool — ideal for quartzite and engineered quartz.
The continuous rim design ensures smoother contact with the stone, cleaner shaping, and reduced chipping.
BOLT / THREAD SYSTEM (IMPORTANT)
Stone router bits do not use a half-inch arbor.
✔ True arbor shaft: 10 mm
Each F-30 bit includes two bolts, both with 10 mm shafts, but different thread sizes:
• 10 mm shaft with 10 mm thread
• 10 mm shaft with 8 mm thread
This fits nearly all portable stone routers.
Both bolts are included with every router bit.
OTHER PROFILES AVAILABLE
We carry the full line of stone router profiles:
• F-20 Ogee
• F-25 Ogee
• V-30 Bullnose
• E-Shape (Bevel)
• L-Shape (Cove)
• H-Shape (Dupont)
• PE Shape (Crescent / Bookend)
Each listing includes its mm-to-inches conversion.
FEATURES
• Position 1 coarse shaping (approx. 30/40 grit)
• Large F-30 ogee — 30 mm (1.25 inches)
• Sintered metal bond
• Continuous rim for smooth shaping and fewer chips
• High diamond concentration for long life
• Excellent for quartzite, granite, quartz, and engineered stone
• Includes two 10 mm shaft bolts (10 mm & 8 mm thread)
• Precision-balanced for stable cutting
• For wet routing only
TECHNICAL DATA
• Position: 1 (coarse shaping)
• Profile: F-30 Ogee
• Profile Height: 30 mm ≈ 1.25 inches
• Bond Type: Sintered metal bond
• Rim Type: Continuous rim
• Diamond Concentration: High
• Arbor Shaft: 10 mm
• Included Bolts:
– 10 mm shaft / 10 mm thread
– 10 mm shaft / 8 mm thread
• Stone Types: Quartz, Granite, Quartzite
• Use: Wet
USAGE NOTES
• Requires continuous water feed
• Do not dry-route quartz or quartzite
• Clean slurry off rim after use
• Store dry
• Recommended RPM: 4,000 to 6,000
